Diferencia entre revisiones de «WebClient»

De ArduWiki
Saltar a: navegación, buscar
(Página creada con «<big>Cliente web</big> Este ejemplo muestra cómo hacer una solicitud HTTP usando un escudo de Ethernet. Devuelve una búsqueda en Google del término "Arduino". Los resul...»)
 
Línea 1: Línea 1:
<big>Cliente web</big>
+
Este ejemplo muestra cómo hacer una solicitud HTTP usando un modulo (sheald) de Ethernet. Devuelve una búsqueda en Google del término "Arduino". Los resultados de esta búsqueda se envían por monitor serie de Arduino.
  
Este ejemplo muestra cómo hacer una solicitud HTTP usando un escudo de Ethernet. Devuelve una búsqueda en Google del término "Arduino". Los resultados de esta búsqueda se pueden visualizar como HTML a través de la ventana serie de Arduino.
+
== Codigo ==
 
+
<syntaxhighlight lang="c++">
<pre>
 
 
/*
 
/*
 
   Web client
 
   Web client
Línea 88: Línea 87:
 
   }
 
   }
 
}
 
}
</pre>
+
</syntaxhighlight>
 +
 
 +
== Vea también ==
 +
 
 +
== Referencias ==
 +
[[Category:Ejemplos]]
 +
[[Category:Libreria Ethernet]]

Revisión del 18:31 30 may 2019

Este ejemplo muestra cómo hacer una solicitud HTTP usando un modulo (sheald) de Ethernet. Devuelve una búsqueda en Google del término "Arduino". Los resultados de esta búsqueda se envían por monitor serie de Arduino.

Codigo

/*
  Web client

 This sketch connects to a website (http://www.google.com)
 using an Arduino Wiznet Ethernet shield.

 Circuit:
 * Ethernet shield attached to pins 10, 11, 12, 13

 created 18 Dec 2009
 by David A. Mellis
 modified 9 Apr 2012
 by Tom Igoe, based on work by Adrian McEwen

 */

#include <SPI.h>
#include <Ethernet.h>

// Enter a MAC address for your controller below.
// Newer Ethernet shields have a MAC address printed on a sticker on the shield
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
// if you don't want to use DNS (and reduce your sketch size)
// use the numeric IP instead of the name for the server:
//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
char server[] = "www.google.com";    // name address for Google (using DNS)

// Set the static IP address to use if the DHCP fails to assign
IPAddress ip(192, 168, 0, 177);

// Initialize the Ethernet client library
// with the IP address and port of the server
// that you want to connect to (port 80 is default for HTTP):
EthernetClient client;

void setup() {
  // Open serial communications and wait for port to open:
  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  // start the Ethernet connection:
  if (Ethernet.begin(mac) == 0) {
    Serial.println("Failed to configure Ethernet using DHCP");
    // try to congifure using IP address instead of DHCP:
    Ethernet.begin(mac, ip);
  }
  // give the Ethernet shield a second to initialize:
  delay(1000);
  Serial.println("connecting...");

  // if you get a connection, report back via serial:
  if (client.connect(server, 80)) {
    Serial.println("connected");
    // Make a HTTP request:
    client.println("GET /search?q=arduino HTTP/1.1");
    client.println("Host: www.google.com");
    client.println("Connection: close");
    client.println();
  } else {
    // if you didn't get a connection to the server:
    Serial.println("connection failed");
  }
}

void loop() {
  // if there are incoming bytes available
  // from the server, read them and print them:
  if (client.available()) {
    char c = client.read();
    Serial.print(c);
  }

  // if the server's disconnected, stop the client:
  if (!client.connected()) {
    Serial.println();
    Serial.println("disconnecting.");
    client.stop();

    // do nothing forevermore:
    while (true);
  }
}

Vea también

Referencias